How to Repaint a Dark-Colored Wall in White

How to Repaint a Dark-Colored Wall in White

Is it possible to repaint a red wall in white without stripping the paint and plastering? Which paint should you choose, semi-gloss or full gloss? Primer is the key ally for fast and quality painting results.

A wall in a darker or vibrant color can look very attractive. Darker walls, combined with light furniture and joinery, can also be a very appealing solution. The problem arises when it’s relatively easy to paint a wall from white to a darker shade, but returning to white can be more complicated. It is possible to achieve snow-white from a darker shade, but certain procedures need to be followed.

Primer is Essential Before Painting

In this text, we will only explain how to return a dark shade of a wall to white. This is possible if the wall is in good condition. First, if necessary, use a spatula and a bit of putty to repair any damage to the wall. Then, apply a primer to the wall, also known as a primer.

Related Articles:

PAINTING CERAMIC TILES – STEP-BY-STEP TIPS

EXTERIOR WALL PAINTING – STEP-BY-STEP TIPS

WALL PAINTING – EASY, ANYONE CAN DO IT

Dilute it according to the instructions on the packaging, and it’s a good idea to inquire at the paint store which primer from their range would be best for painting from a darker shade to white, as not all primers are the same.

After applying the primer, as well as after each “coat” of paint, wait for the walls to dry. Depending on the weather conditions, this can take a few hours or all day. If possible, it is always advisable to keep the windows open to reduce the humidity in the room and speed up the drying of the walls.

Full Gloss for Fastest and Best Results

After applying the primer, apply white paint. It is advisable to use full gloss rather than semi-gloss, as full gloss has better coverage. Of course, it is possible to achieve snow-white with semi-gloss, even if the wall was previously in a dark red shade, but be prepared that you may need up to four coats with semi-gloss.

Do Not Despair After the First Coat!!!

Whichever white paint you use, whether full gloss or semi-gloss, don’t despair after the first pass with the roller. After the first coat, the walls will look patchy, as if they will never be white again, or even in the color they were previously.

However, as the paint dries, you will see the whiteness slowly emerge, so after the second or third pass, an excellent result will be achieved. Of course, before using the roller, first use a brush to cover about ten centimeters around the sockets, doors, in corners, and behind the radiator pipes.

Foto: Freepik

Back to top